Do you ever wonder how to reset a security camera? You’re not alone. As someone who has owned a Ring camera for a few years, I didn’t have any technical issues until now. I noticed the video and audio quality deteriorating, so I wanted to reset the Ring camera. The only problem is I didn’t know where the reset button was located.
It turns out that the location of the reset button on the Ring camera varies depending on the exact model you own. The 1st generation series of the Ring Stick Up cam hides the button under the back cover. Meanwhile, 2nd and 3rd gen models have this button near the battery slot.
Below, I’ll teach you where the reset button on different models of Ring security cameras. I’ll also share some tips on how to use it.
Where Is The Reset Button on Ring Camera Systems?
Do you have a Ring security camera that isn’t playing audio or video? Or, perhaps it doesn’t properly connect to the WiFi network. If so, you likely need to reset the device to its factory settings.
The first thing you must do is find the reset button on the Ring device. However, it is not as obvious or easy as it seems.
The setup button serves as the reset switch of Ring security cameras. Its exact placement depends on the model you have.
Here is a list of Ring camera models and the locations of their reset buttons.
- Ring Stick Up Cam (1st Generation), Ring Stick Up Cam Elite: The orange setup button is situated under the small cover on the back of the camera.
- Ring Stick Up Cam Battery (2nd Generation), Ring Stick Up Cam Battery (3rd Generation), Ring Stick Up Cam Plug-In, Ring Stick Up Cam Pro: It is located near the covered battery slot.
- Ring Spotlight Cam Battery, Ring Indoor Cam (1st Gen and 2nd Gen), Ring Spotlight Cam Wired, Ring Spotlight Cam Pro, Ring Spotlight Cam Plus, Ring Floodlight Cam, Ring Floodlight Cam Wired Plus, Ring Floodlight Cam Wired Pro: The factory reset or setup button sits on top of the Ring device.
How To Use Reset Button on Ring Camera?
Now that you know the locations of the reset buttons on the Ring device, the next thing to learn is how to reset them. The exact method used also varies based on the model you own.
Below, I’ll teach you how to use the reset button on different Ring security cameras.
Ring Stick Up Cam (1st Generation)
The 1st Generation of Stick Up cameras can record surveillance Ring video in 720p resolution. If the video quality deteriorates, the camera might require a factory reset.
Here’s how to reset the Ring 1st Generation Stick Up Camera.
- Find the small cover on the back of your Ring Stick Up Cam.
- Lift the cover to locate the orange setup button, which also acts as the reset button.
- Press and hold the button for 20 seconds to prompt the camera to perform a factory reset.
- See if the light on the front of the camera flashes for several minutes. That means the camera is resetting itself.
- Once the light shuts off, your reset is complete. Turn on the camera and set it up again before using it as normal.
Ring Stick Up Cam Battery (2nd Generation)
The 2nd Generation Ring Stick Up Cam features a high-capacity battery that powers the device for up to 12 hours. However, consider resetting the security camera if it doesn’t reach the expected runtime.
Below is a step-by-step guide on how to do it:
- Open the battery cover.
- Find the orange setup button near the battery slot.
- After locating this button, press and hold it for 10 seconds.
- Wait for the front light to flash, which means the camera is now entering the reset mode.
- When the light stops flashing, the reset is already done. You can set up the surveillance camera again to see if the performance improves.
Ring Stick Up Cam Battery (3rd Generation), Ring Stick Up Cam Plug-In, Ring Stick Up Cam Pro
Ring Stick Up Cameras (3rd Generation) and Pro models have features that are missing in the previous generations. For one, they have night vision. Unfortunately, they may still encounter technical glitches. Fret not, though; these issues can be resolved when you reset your Ring device.
Refer to the following steps below.
- Press down on the battery cover to pull it off the camera body.
- Locate the orange setup button situated beside the battery slot.
- Push and hold the setup button down for up to 10 seconds.
- After the reset is done, the security camera automatically enters the setup mode. Change the default factory settings and use the device as you normally would.
Ring Indoor Cam (1st Gen and 2nd Gen), Ring Spotlight Cam Wired, Ring Spotlight Cam Pro, Ring Spotlight Cam Plus, Ring Stick Up Cam Elite, Ring Floodlight Cam, Ring Floodlight Cam Wired Plus, Ring Floodlight Cam Wired Pro
Ring security cameras come in various models, each with unique features. If any of these functions do not work properly, a simple reset often fixes the problem.
Here’s how to use the reset button on different Ring home security systems.
- Find the orange button on the top of the camera. If you own a Ring Stick Up Cam Elite, you can locate the setup button on the back cover.
- Press and hold the setup button for 10 seconds.
- The camera flashes the front light for a few minutes to signify the reset process is ongoing.
- After a successful reset, the device will enter setup mode. Reconfigure your camera based on your preferences.
- If you will give the Ring camera to another person, you must first disconnect it in the Ring app. Launch the Ring app and tap the gear icon for your dedicated security cam. Choose “General Settings” and tap “Remove this Device.” Ignoring this step prevents the new owner from setting up the Ring camera.
Ring cameras provide security and peace of mind for homeowners. However, like any device, they can encounter technical issues. Fortunately, a simple factory reset solves these glitches.
Finding the reset or setup button is the first step to reset a Ring security camera. The location of this switch can change depending on the exact unit model. Hopefully, this article answered your question, “Where is the reset button on Ring camera?”
Did you find this article informative? You can browse our blog page if you need further help with smart home devices.